Studies of the AA2519 Alloy Hot Rolling Process and Cladding with EN AW-1050A Alloy

Open access

The objective of the study was to determine the feasibility of plastic forming by hot rolling of the AA2519 aluminium alloy sheets and cladding these sheets with a layer of the EN AW-1050A alloy. Numerous hot-rolling tests were carried out on the slab ingots to define the parameters of the AA2519 alloy rolling process. It has been established that rolling of the AA2519 alloy should be carried out in the temperature range of 400-440°C. Depending on the required final thickness of the sheet metal, appropriate thickness of the EN AW-1050A alloy sheet, used as a cladding layer, was selected. As a next step, structure and mechanical properties of the resulting AA2519 alloy sheets clad with EN AW-1050A alloy was examined. The thickness of the coating layer was established at 0,3÷0,5mm. Studies covered alloy grain size and the core alloy-cladding material bond strength.

[1] International Alloy Designations and Chemical Composition Limits for Wrought Al and Wrought Al Alloys, The Aluminium Association, April (2006).

[2] A. Maranda, J. Nowaczewski, E. Włodarczyk, B. Zygmunt, J. Tech. Pchys 20, 19 (1979).

[3] H. Paul, L. Lityńska-Dobrzańska, M. Miszczyk, M. Prażmowski, -Arch Metall Mater 57, 1151-1162 (2012).

[4] S. Saravanan, K. Raghukandan, Arch Metall Mater 59, 1615-1618, (2014).

[5] J. Wypart, D. Rydz, G. Stradomski, H. Dyja, Arch Metall Mater 59, 1572, (2014).

[6] http://www.aluminium-konin.com.pl/predefUpload/katalog_pl.pdf

[7] B. Płonka, J. Senderski, Key Eng Mat 491, 59-66 (2012)

[8] J. Senderski, B. Płonka, M. Lech-Grega, S. Boczkal, W. Pachla, Arch Mater Sci Eng 39, 97-102 (2009).

[9] J. Senderski, M. Lech-Grega, B. Płonka, Arch Metall Mater 56, 475-486 (2011).

[10] B. Płonka, A. Kłyszewski, J. Senderski, M. Lech-Grega, Arch Civ Mech Eng 8, 2, 149-156 (2008).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 119 111 5
PDF Downloads 64 61 3