Explosive Cladding of Titanium and Aluminium Alloys on the Example of Ti6Al4V-AA2519 Joints / Wybuchowe Platerowanie Stopów Tytanu I Aluminium Na Przykładzie Połączenia Ti6Al4V-AA2519

Open access

Explosive cladding is currently one of the basic technologies of joining metals and their alloys. It enables manufacturing of the widest range of joints and in many cases there is no alternative solution. An example of such materials are clads that include light metals such as titanium and aluminum. ach new material combination requires an appropriate adaptation of the technology by choosing adequate explosives and tuning other cladding parameters. Technology enabling explosive cladding of Ti6Al4V titanium alloy and aluminum AA2519 was developed. The clads were tested by means of destructive and nondestructive testing, analyzing integrity, strength and quality of the obtained joint.

[1] J. Senderski, B. Płonka, M. Lech-Grega, S. Boczkal, W. Pachla, Archives of Materials Science and Engineering 39, 97-102 (2009).

[2] P. Korczak, B. Płonka, D. Leśniak, M. Nowak, K. Remsak, S. Boczkal, Magnesium Technology TMS. 257-262 (2015).

[3] B. Płonka, J. Senderski, Key Eng Mat. 491, 59-66 (2012)

[4] J. Senderski, M. Lech-Grega, B. Płonka, Arch. Metall. Mater. 56, 475-486 (2011).

[5] B. Płonka, J. Kut, P. Korczak, M. Lech-Grega, M. Rajda, Arch. Metall. Mater. 57, 619-626 (2012).

[6] H. Dyja, A. Maranda, R. Trąbiński, Zastosowania technologii wybuchowych w inżynierii materiałowej, Częstochowa (2001).

[7] W. Babul, Odkształcanie metali wybuchem, WNT, Warszawa 1980.

[8] A. Papliński, Równowagowe obliczenia termochemiczne z uwzględnieniem dużej ilości składników, Biul. WAT. 42,11 (1993).

[9] A.N. Dremin, K.K. Svedor, V.A. Veretennikov, Vzryvnoe delo. 52, 9, 10 (1963).

[10] K.K. Svedor, A.N. Dremin, Vzryvnoe delo. 60, 17, 33 (1966).

[11] A. Maranda, J. Nowaczewski, E. Włodarczyk, B. Zygmunt, J. Tech. Pchys. 20, 19 (1979).

[12] H. Paul M. Faryna M. Prazmowski R. Banski, Arch. Metall. Mater. 56, 463-474 (2011).

[13] H. Paul, L. Lityńska-Dobrzyńska, M. Miszczyk, M. Prażmowski, Arch. Metall. Mater. 57, 1151-1162 (2012).

[14] Explosion welding. Fundamentals of proces. Weld Handbook; 3, 264-77 (1992).

[15] F. Grignon, D. Benson, K.S. Vecchio, M.A. Meyers, Explosive welding, brazing and soldering 6, 303-600 (1992).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 96 96 3
PDF Downloads 41 41 6