The Influence of Passivation Type on Corrosion Resistance of Ti15Mo Alloy in Simulated Body Fluids / Wpływ Rodzaju Pasywacji Powierzchni Stopu Ti15Mo Na Jego Odporność Korozyjną W Środowisku Płynów Ustrojowych

Open access

This work reports on determination of the influence of passivation type of Ti15wt.%Mo implant alloy surface on its corrosion resistance in simulated body fluids. The alloy under investigation was subjected to natural self-passivation in air, and forced passivation by autoclaving in steam, boiling in 30 % solution of H2O2, and electrochemical passivation in 0.9 % NaCl solution. Resistance of the passivated Ti15Mo alloy to pitting corrosion was studied at 37ºC in 0.9 % NaCl solution using open circuit potential method, anodic polarization curves, and electrochemical impedance spectroscopy (EIS). Comparative estimation of the determined parameters of corrosion resistance revealed that the obtained passive layers improve anticorrosive properties of the tested alloy. Surface of the alloy subjected to passivation in steam autoclave reveals the highest protection against pitting corrosion. Anodic potentiodynamic curves showed that the Ti15Mo alloy after different passivation types of the surface is characterized by a lack of susceptibility to pitting corrosion up to potential of 9 V. Based on the EIS investigations, the thickness of the formed oxide layers (TiO2, anatase) was determined to be in the range from 2.0 to 7.8 nm in dependence on the applied type of passivation. It was ascertained that electrochemical properties of the Ti15Mo alloy and possibility of its surface passivation using simple methods, make it an attractive material for use in biomedicine for long-term implants.

[1] M. Geetha, U. Kamachi Mudali, A.K. Gogia, R. Asokamani, R. Baldev, Corros. Sci. 46, 877-892 (2004).

[2] M. Freitag, B. Łosiewicz, T. Goryczka, J. Lelątko, Solid State Phenom. 183, 57-64 (2012).

[3] J. Szewczenko, J. Marciniak, M. Kaczmarek, Eng. Biomat.

[4] T. Błaszczyk, B. Burnat, L. Klimek, H. Scholl, Eng. Biomat. 96-98, 10-15 (2010).

[5] M. Papakyracou, H. Mayer, C. Pypen, H. Plenk Jr, S. Stanzl- Tschegg, Int. J. Fatigue 22, 873-886 (2000).

[6] S. Shabalovskaya, J. Anderegg, J. Van Humbeeck, Acta Biomater. 4, 447-467 (2008).

[7] N.T.C. Oliviera, A.C. Guastaldi, Acta Biomater. 5, 399-405 (2009).

[8] J.R. Birch, T.D. Burleigh, Corrosion, 56, 1233-1241 (2000).

[9] ASTM G 102-89: „Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements”.

[10] J. Disegi, Implant Materials Wrought-15% Molybdenum, Synthes, West Chester 2009.

[11] N. Takeno, Atlas of Eh-pH diagrams. Intercomparision of thermodynamic databases. Open File Report No. 419. National Institute of Advanced Industrial Science and Technology, Geological Survey of Japan, Tokyo, Japan 2005.

[12] M. Metikos-Hukovic, A. Kwokal, J. Piljac, Biomaterials 24, 3765-3775 (2003).

[13] W. Simka, Electrochim. Acta, 56, 9831-9837 (2011).

[14] K. Wang, Y.S. Li, P. He, Electrochim. Acta, 43, 2459-2467 (1998).

[15] Y.L. Zhoua,, D.M. Luob, J. Alloys Compd. 509, 6267-6272 (2011).

[16] H. Habazakia, M. Uozumia, H. Konnoa, S. Nagatab, K. Shimizuc, Surf. Coat. Technol. 169 -170, 151-154 (2003).

[17] Z. Lekston, B. Łosiewicz, A. Winiarski, M. Jędrusik- Pawłowska, M. Kromka-Szydek, K. Miernik, Eng. Biomat. 96-98, 29-33 (2010).

[18] A. Lasia, in: B.E. Conway, J.O’M. Bockris, R.E. White (Eds.), Modern Aspects of Electrochemistry 35, Kluwer/Plenum, New York (2002).

[19] H. Morawiec, J. Lelątko, A. Winiarski, G. Stergioudis, T. Goryczka, P. Pączkowski, Eng. Biomat. 37, 32 (2004).

[20] A. Pardo, M.C. Merino, A.E. Coy, F. Viejo, R. Arrabal, E. Matykina, Corros. Sci. 50, 1796-1806 (2008).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information

IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By


All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 154 148 15
PDF Downloads 60 58 5