Role of the Continuous Casting Forms on the Shape of the Solidified Crust / Wpływ Geometrii Formy Na Kształt Frontu Krzepnięcia Przy Odlewaniu Ciągłym

Open access

An analytical model for the transfer has been development and applied for calculating the shape of the solid thickness profile for continuous casting of a thin plate as an example. The stationary solidification front relative to the crystallizer was received from the superposition of the motions of the liquid metal flow in the axial direction and the solidifying metal in the perpendicular direction. The shape of the solidified crust was analyzed for different casting forms. The results are compared and graphically shown for different selected forms.

[1] B. Mochnacki, B. Ortyl, Modelowanie numeryczne procesu odlewania ciągłego metodą wędrującego przekroju przy zmiennej w czasie siatce różnicowej, Zeszyty Naukowe Politechniki Śląskiej, Mechanika 62, 37-43 (1978).

[2] R. Grzymkowski, B. Mochnacki, Analiza krzepnięcia wlewka w procesie ciągłego odlewania stali, Krzepnięcie metali i stopów 2, 69-125 (1980).

[3] B. Mochnacki, J.S. Suchy, Modelowanie i symulacja krzepnięcia odlewów, PWN, Warszawa (1993).

[4] B. Mochnacki, Application of the BEM for numerical modeling of continuous casting, Computational Mechanics 18, Springer- Verlag, 62-71 (1996).

[5] A.K. Tieu, I.S. Kim, Simulation of the continuous casting process by mathematical model, Int. J. Mech. Sci..39, 2, 185-192 (1997).

[6] E. Majchrzak, B. Mochnacki, M. Dziewoński, M. Jasiński, Identification of boundary heat flux on the continuous casting surface, Archives of Foundary Engineering 8. 105-110 (2008).

[7] L. Sowa, A. Bokota, Numerical model of thermal and flow phenomena the process growing of the CC slab, Archives of metallurgy and materials 56 359-366 (2011).

[8] J.S. Walker, E. Georgopoulos, Slow solidification of a cylinder with constant heat efflux, Int. Comm. Heat Mass Transfer 11, 45-53 (1984).

[9] Z. Lipnicki, K. Pantoł, B. Weigand, Role of the contact layer on the continuous casting of thin metal rods, Archives of Metallurgy and Materials 58, 2 (2013).

[10] T. Loulou, E.A. Artyukhin, J.P. Bardon, Solidification of molten tin drop on a nickel substrate, 10th Int. Heat Transfer Conference, Brighton, UK 4, 73-78 (1998).

[11] T. Loulou, J.P. Artyukhin, J.P. Bardon, Estimation of thermal contact resistance during the first stages of metal solidification process: I - experiment principle and modelisation, Int. J. Heat and Mass Transfer 42, 2119-2127 (1999).

[12] T. Loulou, J.P. Artyukhin, J.P. Bardon, Estimation of thermal contact resistance during the first stages of metal solidification process: II - experimental setup and results, Int. J. Heat and Mass Transfer 42, 2129-2142 (1999).

[13] Z. Lipnicki, Role of the contact layer between liquid and solid on solidification process, Int. J. Heat and Mass Transfer 46, 2149-2154 (2003).

[14] Z. Lipnicki, B. Weigand, A. Bydałek, On the effect of a variable thermal contact resistance on the solidification process, Archives of Metallurgy and Materials 50, 1055-1064 (2005).

[15] Z. Lipnicki, B. Weigand, Influence of thermal boundary layer on the contact layer between a liquid and a cold plate in a solidification process, Heat and Mass Transfer 47, 1629-1635 (2011).

[16] Z. Lipnicki, B. Weigand, An experimental and theoretical study of solidification in a free-convection flow inside a vertical annular channel, Int. J. Heat and Mass Transfer 55, 655-664 (2012).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 155 155 8
PDF Downloads 65 65 6