Experimental and Fe Analysis of Aluminium Alloy Plastic Flow in the Forward Microextrusion Processes

Open access

Abstract

The main aim of the paper is an evaluation of the real impact of a container surface roughness on metal plastic flow in the forward microextrusion process. For the purposes of experiment a specially designed and constructed by authors toolkit was used. Analyzed material was an annealed aluminium wire with 1,7 mm in diameter, with a stress-strain curve defined. Toolkit contains two experimental models of containers and rectangular dies with the same dimensions, differing only in the containers roughness degree. In order to determine the degree of the containers top layers asperities a roughness profiles with using laser microscope were made for each. Punch pressures have been calculated while forward extruding. In the next step the deflection of parallel lines marked at the samples longitudinal sections were analyzed. The extruded samples were submitted to the microhardness testing. Numerical analyses of analogous microextrusion processes have been also conducted. Container surface roughness was modelled as a rigid triangular wave with a zero friction factor at the interface m =0. Punch pressures and shapes of extruded samples flow nets were determined. Conducted investigations revealed the possibility of receiving products with different mechanical properties obtained by the container roughness assorting.

[1] U. Enge l, R. Eckstein, Microforming - from basic research to its realization, Journal of Materials Processing Technology, 125-126 (2002).

[2] A. Messner, U. Engel, R. Kals, F. Vollertsen, Size effect in the FE-simulation of microforming processes, Journal of Materials Processing Technology, 371-376 (1994).

[3] C. Wang, D. Shan, B. Guo, J. Zhou, L. Sun, Key problems in microforming process of microparts. Journal of Materials Science and Technology, 283-288 (2007).

[4] C. Barbier, S. Thibaud, P. Picart, Size effects on material behaviour in microforming. International Journal of Material Forming, 439-442 (2008).

[5] F. Vollertsen, Size effects in microforming. Key Engineering Materials, 3-12 (2011).

[6] F. Vollertsen, H.S. Niehoff, Z. Hu, State of the art in microforming. International Journal of Machine Tools & Manufacture, 1172-1179 (2006).

[7] F. Vollertsen, Z. Hu, H.S. Niehoff, C. Theiler, State of the art in microforming and investigations into micro deep drawing, Journal of Materials Processing Technology, 70-79 (2004).

[8] J. Piwnik, K. Mogielnicki, K. Garbala, Problems related to microextrusion process, Scientific and Didactic Equipment, 26-31 (2009).

[9] J. Cao, N. Krishnan, Z. Wang, H. Lu, W.K. Liu, A. Swanso n, Microforming - Experimental investigation of the extrusion process for micropins and its numerical simulation using RKEM, ASME Journal of Manufacturing Science and Engineering, 642-652 (2004).

[10] H.J. Jeon, A.N. Bramley, A Friction Model for Microforming, The International Journal of Advanced Manufacturing Technology, 125-129 (2007).

[11] E. Vidal- Sallé, S. Maisonnette-Masson, J.C. Boyer, About the validity of the plastic wave model for an actual roughness of axisymmetric tooling in bulk forming, International Journal of Material Forming 2, 217-220 (2009).

[12] J. Piwnik, K. Mogielnicki, M. Gabrylewski, P. Baranowski, The experimental tool for microextrusion of metals, Archives of Foundry Engineering, 195-198 (2011).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 108 90 7
PDF Downloads 79 74 2