Progress in Fabrication Technology of Silver-Based Contact Materials with Particular Account of the Ag-Re and Ag-SnO2Bi2O3 Composites

Open access

Abstract

The paper outlines technologies currently used for the production of the Ag-Re10 and Ag-SnO2Bi2O3 contact materials in a form of wires and solid and bimetallic rivets. Their characteristic parameters, including physical and mechanical properties and microstructure, are given. It has been found that the level of these parameters, particularly electrical properties (resistance to electric arc erosion), is unsatisfactory considering the present requirements, which applies mainly to the new Ag-Re10 [wt%] alloy, so far not fully technologically mastered. Therefore, under this work a new method for the production of this type of materials has been designed and the related research works were undertaken. The new-generation contact materials in a form of nanostructured composites will be characterised by similar chemical compositions as those specified above but with increased functional properties, including enhanced resistance to arc erosion. In this paper preliminary results of the examination of structure and properties of semi-products obtained by new technology based on powder metallurgy techniques are presented. Conditions for pressure consolidation and plastic consolidation applied for material processing into wires and rivets (solid and bimetallic) have been determined.

[1] S. Ksiezareket al., Amethod for the production of wires from the metal ceramic material designed for electrical contact, Polish Patent No. 165438 of 20.04.1995.

[2] S. Ksiezarek, B. Besztak, Wire used in the production of electric contacts, Wire Journal International - April 2000.

[3] E. Walczuk, P. Borkowski, S. Ksiezare k, W. Missol, Z. Rdzawski, K. Durst, Evaluation of Basic Electrical Parameters of Different Chemical Composition And Manufacturing Technology, The 25th International Conference on Electrical Contact and the 56th IEEE Holm Conference on Electrical Contacts, October 2010 Charlston USA, 134-141.

[4] S. Ksiezare k, D. Kołacz, M. Woch, M. Czepelak, M. Osadnik, M. Karpinski, K. Marszowski, Ł. Wierzbicki, M. Kaminska, Development of process guideless for the production of new composite material Ag-Re (5, 8 and 10 wt%) for electric contacts, IMN Report 6886/2010. Unpublished.

[5] M. Woch, S. Ksiezarek, D. Kołacz, W. Kurylak et al., Development of new composites, Mechanical Alloying and PMtechnologies (development of two groups of composites: Ag Sn O2Bi2O3 and AgZnO-grup Iand Ag based special nanocomposites Ag-RE-grup II) NANOMININGgrant agreement No. 263942, 2010. Unpublished.

[6] D. Kołacz, S. Ksiezareket al., An effect of mechanical alloying and plastic consolidation on microstructure and properties ofacomposite Ag-Re material, IMN Report, No 7002/2011, Unpublished.

[7] F. Hauner, D. Jeannot, J. Pinard, AgFe and AgFe2O3 Contact Materials for Low Voltage Switchear, 19th International Conference on Electric Contact Phenomena, 14-17 Septemberg, 1998 Nuremberg Germany.

[8] M. Czepelak et al., R&D Project POIG.01.03.01-00-086/09 Advanced technologies for the production of functional materials for energy conducting, converting and storing, Subtask I.2.1 - Development of the production guidelines of silver-based contact materials containing 5% and 10% addition of rhenium in order to enhance performance of contact tips, IMN Report, 2011, unpublished.

[9] P. Borkowski, D. Boczkowski, T. Wysocki, Computer-controlled system for testing contacts on switching high current. Measurement 40, 3, 294-299 (2007).

[10] K. Frydman, D. Wojcik - Grzybek, P. Borkowski, The influence of the microstructure on the electrical properties of Ag-C, Ag-WCand Ag-W-Ccontent materials. Archives of Metallurgy and Materials 4, 58 (2013).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 141 141 11
PDF Downloads 46 46 2