Influence of Deformation Process by ECAE on Structure and Properties of AZ61 Alloy

Open access

Abstract

The structure and properties of AZ61 alloy after deformation by ECAE were characterised. Alloy structure was examined after the successive passes of ECAE process, to study the effect of deformation on the morphology of γ phase precipitates and the size and shape of grains. Based on EBSD analysis, the occurrence of high angle boundaries was stated. An attempt was made to describe the mechanisms that are operating when the deformation route is changed at 300°C in the AZ61 alloy processed by ECAE method. Alloy hardness after the first cycle of deformation was stabilised at the level of 80-90 HB. Based on the hardening curve and the occurrence of high angle grain boundaries (>15°), the possibility of further deformation of the AZ61 alloy was confirmed.

[1] W.A. Monteiro, S.J. Buso, L.V.da Silva, New features on magnesium alloys 7, 161 (2012), Intechopen.com.

[2] J. Zhang, Z.X. Guob, F. Pan, Z. Li, X. Luoa, Mater. Sci. and Eng. A 456, 43 (2007).

[3] T. Rzychon, A. Kiełbus, Arch. of Metall. and Mater. 53, 901 (2008).

[4] B. Płonka, M. Lech - Grega, K. Remsak, P. Ko - rczak, A. Kłyszewski, Arch. of Metall. and Mater. 58, 127 (2013).

[5] J. Jiang, X. Lin, Y. Wang, J. Qu, S. Luo, Transactions of Nonferrous Metals Society of China 22, 555 (2012).

[6] F. Czerwinski, A. Zielinska- Lipiec, Acta Mater. 51, 3319 (2003).

[7] H.K. Kim, W.J. Kim, Mat. Scie. Engin. A 385, 300 (2004).

[8] W.J. Kim, C.W. An, Y.S. Kim, S.I. Hong, Scripta Mat. 47, 39-44 (2002).

[9] T. Liu, W. Zhang, S.D. Wu, C.B. Jiang, S.X. Li, Y.B. Xu, Mater. Scien. Engin. A 360, 345 (2003).

[10] M. Mabuchi, H. Iwasaki, K. Yanase, K. Hi - gashi, Scripta Materialia 36, 681 (1997).

[11] I.A. Yakubtsov, B.J. Diak, C.A. Sager, B. Bhat - tacharya, W.D. Mac Donald, M. Niewczas, Mater. Scien. Eng. A 496, 247(2008).

[12] D. Hanl In, L. Liufa, K. Shigeharu, D. Wen- jiang, K. Yo, Mater. Scien. Eng. A 452-453, 503 (2007).

[13] M. Lech - Grega, S. Boczkal, J. Senderski, B. Płonka, Solid State Phen. 114, 165 (2006).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 88 88 5
PDF Downloads 50 50 4