Modification of Ti-6Al-4V Alloy Surface by EPD-PEO Process in ZrSiO4 Suspension

Open access

Abstract

Investigations on the surface modification of the Ti-6Al-4V alloy by plasma electrolytic oxidation are reported here. The oxidation process was carried out in a solution containing a zirconium silicate (ZrSiO4) suspension and sodium hydroxide (NaOH). Anodising was realised at voltages in a range from 100 V to 250 V. It was found that the morphology of the sample surface did not change during the oxidation of the alloy at 100 V. Application of voltages higher than 100 V led to the incorporation of zirconium silicate into the formed oxide layer and to significant changes of the surface morphology.

[1] M. Long, H.J. Rack, Biomaterials 19, 1621 (1998).

[2] I. Apachitei, A. Leoni, A.C. Riemslag, L.E. Apachitei- Fratila, J. Duszczyk, Applied Surface Science 257, 6941 (2011).

[3] M. Shokoufar, C. Dehghanian, M. Montazeri, A. Baradaran, Applied Surface Science 258, 2416 (2012).

[4] C. Kuphasuk, Y. Oshida, C.J. Andres, S.T. Hov- ijitra, M.T. Barco, D.T. Brown, The Journal of Prosthetic Dentistry 85, 195 (2001).

[5] S.R Sousa, M.A. Barbosa, Biomaterials 17, 397 (1996).

[6] C. Piconi, G. Maccauro, Biomaterials 20, 1 (1999).

[7] Y. Ramaswamy, C. Wu, A. Van Hummel, V. Combes, G. Grau, H. Zreiqat, Biomaterials 29, 4392 (2008).

[8] Y. Ramaswamy, C. Wu, A. Van Hummel, V. Combes, Biomaterials 29, 4392 (2008).

[9] H. Hu, X. Liu, C. Ding, Surface and Coating Tech. 204, 3265 (2010).

[10] A.M. Pietak, J.M. Reid, M.J. Stott, M. Sayer, Biomaterials 28, 4023 (2007).

[11] X.L. Zhang, H.Zh. Jiang, H.Zh. Yao, D.Zh. Wu, Corrosion Science 52, 3465 (2010).

[12] B. Ferrari, R. Moreno, Journal of the European Ceramic Society 30, 1069 (2010).

[13] E. Matykina, R. Arrabal, F. Monfort, P. Skel - don, G.E. Thompson, Applied Surface Science 255, 2830 (2008).

[14] F. Samanipour, M.R. Bayati, F. Golestani- Fard, H.R. Zargar, A.R. Mirhabibi, V. Shoaei - Rad, S. Abbasi, Materials Letters 65, 926 (2011).

[15] A.M. Pietak, J.W. Reid, M.J. Scott, M. Sayer, Biomaterials 28, 4023 (2007).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 142 135 9
PDF Downloads 60 58 4