Structure Investigation of Ball Milled Composite Powder Based on AlSi5Cu2 Alloy Chips Modified by Sic Particles

Open access

The paper is focused on the processing of aluminum alloy chips using powder metallurgy. Chips obtained from recycled AlSi5Cu2 alloy were ball milled with the addition of silicon carbide powder with an average size of 2μm. Mechanical alloying process was employed to obtain homogeneous composite powder. The effect of processing time (0 - 40h) on the homogeneity of the system was evaluated, as well as a detailed study of the microstructure of AlSi5Cu2 aluminum chips and SiC particles during MA was carried out. Addition of silicon carbide (10, 20wt%) to recycled aluminium chips and application of MA lead to fragmentation of the homogeneous composite powder down to particle size of about 3μm and spheroidization. The addition of hard SiC particles caused reinforcement and reduced the milling time. Higher content of silicon carbide and longer processing time allowed to obtain AlSi5Cu2/SiC powders with microhardness ∽500HV0,025. The results of MA were investigated with SEM, EDS, LOM, XRD and showed that relatively homogeneous distribution of SiC reinforcements in the matrix as well as grain refinement of aluminum solid solution down to 50nm can be obtained after 40h of processing.

[1] N. Zhao, P. Nash, X. Yang, The effect of mechanical alloying on SiC distribution and properties of 6061 aluminum composite, Journal of Materials Processing Technology 170, 586-592 (2005).

[2] C. Suryanarayana, Mechanical alloying and milling, Progress in Materials Science 46, 1-184 (2001).

[3] M. Samuel, A new technique for recycling aluminum scrap, Journal of Materials Processing Technology 135, 117-124 (2003).

[4] J.B. Fogagnolo, E.M. Ruiz - Navas, M.A. Simón, M.A. Martinez, Recycling of aluminum matrix composite chips by pressing and hot extrusion, Journal of Materials Processing Technology 143-144, 792-795 (2003).

[5] J. Gronostajski, A. Matuszak, The recycling of metals by plastic deformation: an example of recycling of aluminum and its alloys chips, Journal of Materials Processing Technology 92-93, 35-41 (1999).

[6] W. Chmura, J. Gronostajski, Mechanical and tribological properties of aluminum-base composites produced by recycling of chips, Journal of Materials Processing Technology 106, 23-27 (2000).

[7] H. Dybiec, K. Pieła, J. Piotrowska, Recykling wiórów AlCu3,8 metoda konsolidacji plastycznej, Rudy i Metale Niezelazne 54, 676-684 (2009).

[8] M. Susniak, J. Karwan - Baczewska, J. Dutkiewicz, M. Actis Grande, Structural analysis of composite powders obtained from recycled material, Inzynieria Materiałowa 186, 86-89 (2012).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 100 98 6
PDF Downloads 67 67 6