Microstructure of Polycrystalline Zinc Subjected to Plastic Deformation by Complex Loading / Mikrostruktura Polikrystalicznego Cynku Odkształconego Plastycznie W Złozonym Schemacie Deformacji

Open access

Polycrystalline, high purity (99,995%) zinc ingot was subjected to KoBo type extrusion in room temperature. Material was extruded to form of a 2 mm diameter wire, extrusion die oscillated during process by an angle ±8_ at a frequency of 5 Hz and the extrusion speed was 0.5 mm/s. Final product was tested for tensile strength and yielded R0;2 ≈ 150MPa and Rm ≈ 250MPa. Microstructure of both extruded and initial materials was investigated by means of high resolution Electron Backscatter Diffraction (EBSD) in Quanta 3D FEG scanning electron microscope (SEM). Observations revealed that microstructure of extruded zinc sample is highly heterogeneous and consists of grains elongated slightly in the direction of extrusion. Grains dimensions ranges from over one hundred microns down to submicron scale while grains in the non-deformed material are equiaxed with mean diameter of approximately 200 microns. Other microstructure features such as intergranular bands and partly fragmented primary grains with subgrain structure are observed. Furthermore detailed study of local microstrains by Imaqe Quality Factor analysis are performed. Presence of Geometrically Necessary and Statistically Stored Dislocations is assessed. Thick areas of highly distorted lattice adjacent to High Angle Grain Boundaries are revealed. Microstrain mapping suggest composite-like microstructure of deformed material, that might explain its superior mechanical properties.

[1] R.Z. Valiev, R.K. Islamgaliev, I.V. Alexandrov, Prog Mater Sci. 45, 103-189 (2000).

[2] Y.T. Zhu, T.G. Langdon, JOM. 58-63 October 2004.

[3] M.A. Meyers, A. Mishra, D.J. Benson, Prog Mater Sci. 51, 427-556 (2006).

[4] K.S. Kumar, H. Van Swygenhoven, S. Suresh, Acta Mater 51, 5743-5774 (2003).

[5] A. Korbel, W. Bochniak, European Patent No. 0711210, U.S. Patent No. 573959.

[6] A. Korbel, W. Bochniak, P. Ostachowski, L. Blaz, Metall Mater Trans A. 42A, 2881-2897 (2011).

[7] A. Korbel, W. Bochniak, SCRIPTA MATER. 51, 755-759 (2004).

[8] A. Korbel, J. Pospiech, W. Bochniak, A. Tarasek, P. Ostachowski, J. Bonarski, Int J Mat Res. 102, 464-473 (2011).

[9] X. Zhang, H. Wang, R.O. Scattergood, J. Narayan, C.C. Koch, A.V. Sergueeva, A.K. Mukherjee, Acta Mater. 50, 4823-4830 (2002).

[10] R.A. Schwarzer, D.P. Field, B.L. Adams, M. Kumar, A.J. Schwartz, Present State of Electron Backscatter Diffraction and Prospective Developments in A.J. Schwartz, M. Kumar, B.L. Adams, D.P. Field (Ed) Electron Backscatter Diffraction in Materials Science, Second Edition, Springer 2009.

[11] K. Sztwiertnia, Orientacja krystalograficzna w badaniach mikrostruktury materiałów, Kraków 2009.

[12] S.I. Wright, M.M. Nowell, D.P. Field, Microsc Microanal. 17, 316-329 (2011).

[13] L.N. Brewer, D.P. Field, C.C. Merriman, Mapping and Assessing Plastic Deformation Using EBSD in A.J. Schwartz, M. Kumar, B.L. Adams, D.P. Field (Ed) Electron Backscatter Diffraction in Materials Science, Second Edition, Springer 2009.

[14] H. Gao, Y. Huang, Scripta Mater. 48, 113-118 (2003).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information

IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By


All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 102 102 3
PDF Downloads 61 61 4