Mechanical Properties And Creep Resistance Of Nickel Alloys After Complex Modification And Double Filtration

Open access

Mechanical Properties And Creep Resistance Of Nickel Alloys After Complex Modification And Double Filtration

The paper presents the results of studies to determine the effect of complex surface and bulk modification and double filtration during mould pouring on the stereological parameters of macrostructure and mechanical properties of castings made from the post-production waste IN-713C and the MAR-247 nickel alloys. The evaluation covered the number of grains per 1mm2 of the sample surface area, the average area of grains and the shape index, hardness HB, tensile strength and resistance to high temperature creep. The results indicate the possibility of controlling the stereological parameters of macrostructure through application of several variants of the modification, controlling in this way also different low- and high-temperature properties. The positive effect of double filtration of the alloy during mould pouring on the metallurgical quality and mechanical properties of castings has also been emphasized.

Zupanic F., Boncina T., Krizman A., Tichelaar F. D. (2001). Structure of continuously cast Ni-based superalloy Inconel 713C. Journal of Alloys and Compounds. 329 (1-2), 290-297.

Tabuchi M., Kubo K., Yagi K., Yokobori Jr A. T., Fuji A. (1999). Results of a Japanese round robin on creep crack growth evaluation methods for Ni-base superalloys. Engineering Fracture Mechanics. 62 (1), 47-60.

Pucka G. (1984). Preparing technology of gas turbine blades with adjustable grain size. Materials Engineering. 4-5, 115-119 (in Polish).

Liu L., Huang T., Xiong Y. (2005). Grain refinement of superalloy K4169 by addition of refineries: cast structure and refinement mechanisms. Materials Science and Engineering. A (394), 1-8.

Y. Xiong, J. Du, X. Wie, A. Yang, L. Liu (2004) Grain refinement of Superalloy IN 718C by the addition of Inoculants. Metallurgical and Materials Transactions A. 35A, 2111-2114.

Xiong Y., Yang A., Guo Y., Liu W., Liu L. (2001). Grain refinement of superalloys K3 and K4169 by the addition of refiners. Science and Technology of Advanced Materials. 2, 13-17.

Zielińska M., Sieniawski J., Wierzbińska M. (2008). Effect of modification on microstructure and mechanical properties of cobalt casting superalloy. Archives of Metallurgy and Materials. 53 (3), 887-893.

Binczyk F., Śleziona J. (2010). Effect of modification on the mechanical properties of IN-713C alloy. Archives of Foundry Engineering. 10 (1), 195-198.

Binczyk F., Śleziona J. (2010). Mechanical properties and creep resistance behaviour of IN-713C alloy castings. Archives of Foundry Engineering, 10 (4), 9-13.

Binczyk F., Śleziona J., Gradoń P. (2011). Modification of the macrostructure of nickel superalloys with cobalt nanoparticles. Composites. 11 (1), 49-55.

Binczyk F., Śleziona J., Gradoń P. (2011). Ceramic filters for bulk inoculation of nickel alloy castings. Archives of Foundry Engineering, 11 (Special Issue 3), 29-33.

Binczyk F., Śleziona J., Szymszal J., Gradoń P. (2011). Effect of technological parameters on structure of castings made from IN-713C nickel alloy. Archives of Foundry Engineering. 11 (4), 9-13.

Binczyk F., Śleziona J., Mikuszewski T. (2010). Effect of repeated remelting on the chemical composition and structure of nickel alloys. Archives of Foundry Engineering. 10 (SI 1), 189-194.

Binczyk F., Śleziona J. (2010). The ATD thermal analysis of selected nickel superalloys. Archives of Foundry Engineering. 10 (2), 13-19.

Archives of Foundry Engineering

The Journal of Polish Academy of Sciences

Journal Information


CiteScore 2016: 0.42

SCImago Journal Rank (SJR) 2016: 0.192
Source Normalized Impact per Paper (SNIP) 2016: 0.316

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 122 120 8
PDF Downloads 39 38 6