Evaluation of Reclamability of Molding Sands with New Inorganic Binders

Open access

Evaluation of Reclamability of Molding Sands with New Inorganic Binders

One of the purposes of the application of chemically modified inorganic binders is to improve knocking out properties and the related reclamability with previously used in foundry inorganic binder (water glass), which allowing the use of ecological binders for casting non-ferrous metals. Good knocking out properties of the sands is directly related to the waste sands reclamability, which is a necessary condition of effective waste management. Reclamation of moulding and core sands is a fundamental and effective way to manage waste on site at the foundry, in accordance with the Environmental Guidelines. Therefore, studies of reclamation of waste moulding and core sands with new types of inorganic binders (developed within the framework of the project) were carried out. These studies allowed to determine the degree of recovery of useful, material, what the reclaimed sand is, and the degree of its use in the production process. The article presents these results of investigation. They are a part of broader research programme executed under the project POIG.01.01.02-00-015/09 "Advanced materials and technologies".

Baliński A. (2009). About structure of hydrated sodium silicate as a binder of moulding sands, ed. by Foundry Research Institute, (ISBN 978-83-88-770-43-2), Kraków, (in Polish).

Vasková I., Bobok Ľ. (2002). Some knowledge of the water glass modification by the phosphate compounds. Acta Metallurgica Slovaca. 8 (2), 161-167 (in Slovak).

Stechman M., Różycka D., Baliński A. (2003). Modification of aqueous sodium silicate solutions with morphoactive agents. IV Conference on Chemical Technology, Polish Journal of Chemical Technology. 5 (3), 47.

Jelinek P., Skuta R. (2003). Modified sodium silicates - a new alternative for inorganic foundry binders. Materials Enginering 10 (3), 283 (in Czech).

Major-Gabryś K. et al. (2012). The influence of Glassex additive on properties of microwave-hardened and self-hardened moulding sands with water glass. Archives of Foundry Engineering. 12 (1), 130-134.

Izdebska-Szanda I. (2009). Moulding sand with silicate binder characterized by beneficial technological and ecological properties, Doctor's Thesis, Faculty of Mechanical Engineering and Management, Poznań University of Technology, Poznań.

Vaskova I., Bobok L., Sevcova M. (2003). Relationships between the physical characteristics of water glass and the technological characteristics of water glass-based moulding and core sands. Materials Enginering. X (3), 249 (in Czech).

Multi-author work (2005). A guide for the best available techniqes (BAT) - recommendations for foundry sector, Ministerstwo Środowiska, 202-212.

Izdebska-Szanda I. et, al. (2008). Investigating the kinetics of the binding process in moulding sands using new, environment-friendly, inorganic binders. Archives of Foundry Engineering. 8 (2), 61-66.

Izdebska-Szanda I., Szanda M., Matuszewski S. (2011). Technological and ecological studies of moulding sands with new inorganic binders for casting of non-ferrous metal alloys. Archives of foundry Engineering. 11 (1). 43-48.

Izdebska-Szanda I., Baliński A. (2011). New generation of ecological silicate binders, Imprint: ELSEVIER. 10, 887-893.

Archives of Foundry Engineering

The Journal of Polish Academy of Sciences

Journal Information


CiteScore 2016: 0.42

SCImago Journal Rank (SJR) 2016: 0.192
Source Normalized Impact per Paper (SNIP) 2016: 0.316

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 162 159 11
PDF Downloads 78 77 5