The Quality of Welded Connections Elements from the Steel 30HGS and Titanium Alloy Ti6Al4V

Open access

The Quality of Welded Connections Elements from the Steel 30HGS and Titanium Alloy Ti6Al4V

The aim of that work was the evaluation of the quality of welded connections elements (welds) from the 30HGS steel and titanium alloy Ti6Al4V. The metallographic, factographic tests were used, and measurements of microhardness with the Vickers method. In the head weld of the 30HGS steel there were non-metallic partial division and bubbles observed. The average microhardness in the head connection was 320 HV0.1. There was no significant increase/decrease observed of microhardness in the head influence zone of the weld. There was a good condition of head connections observed, in accordance with the standard EN12517 and EN25817. In the head weld of Ti6Al4V titanium alloy there were single, occasional non-metallic interjections and bubbles observed. There were no cracks both on the weld, and on the border of the heat influence zone. The value of microhardness in head connection was in the range 300÷445 HV0.1. Reveal a very good condition of the head connections in accordance with the standard EN12517 and EN25817. The factographic tests prove the correctness of welded connections done and then heat treatment in case of steel and titanium alloy.

Balasubramaniana V., Guhab B. (2004). Effect of welding processes on toe cracking behaviour of pressure vessel grade steel. Engineering Failure Analysis. 11 (4), 575-587.

Balasubramanian T. S., Balakrishnan M., Balasubramanian V., Muthu M. A. (2011). Influence of welding processes on microstructure, tensile and impact properties of Ti-6Al-4V alloy joints. Transactions of Nonferrous Metals Society of China. 21 (6), 1253-1262.

Shaogang W., Xinqiang W. (2012). Investigation on the microstructure and mechanical properties of Ti-6Al-4V alloy joints with electron beam welding. Materials & Design. 36, 663-670.

Wanga J., Caoa J., Fenga J. (2010). Microstructure and mechanical performance of depositing CuSi3 Cu alloy onto 30CrMnSi steel plate by the novel consumable and non-consumable electrodes indirect arc welding. Materials & De-sign. 31 (4), 2253-2258.

Squillace A., Prisco U., Ciliberto S., Astarita A. (2012). Effect of welding parameters on morphology and mechanical properties of Ti-6Al-4V laser beam welded butt joints. Journal of Materials Processing Technology, 212 (2), 427-436.

Jokinena T., Kujanpääb V. (2003). High power Nd:YAG laser welding in manufacturing of vacuum vessel of fusion reactor. Fusion Engineering and Design. 69 (1-4), 349-353.

Archives of Foundry Engineering

The Journal of Polish Academy of Sciences

Journal Information

CiteScore 2016: 0.42

SCImago Journal Rank (SJR) 2016: 0.192
Source Normalized Impact per Paper (SNIP) 2016: 0.316


All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 114 112 8
PDF Downloads 50 50 4