Preparation and Characterization of a Novel Aqueous Dispersion for Enteric Coating of Pantoprazole Sodium Pellets

Open access

Abstract

The purpose of this work was to investigate a novel aqueous dispersion (Eudragit® L100-55) f or e nteric c oating o f drugs. Three different casting solutions, Eudragit® L100-55 aqueous dispersion, Eudragit® L 100-55 o rganic s olution, and Eudragit® L30D-55 aqueous dispersion, were used to prepare free films by the casting method. Drug-loaded pellets, prepared by the extrusion-spheronization method, were coated with one of these three coating solutions using the fluidized-bed spray coating technology. Properties of the free films were thoroughly investigated. Films formed by Eudragit® L100-55 aqueous dispersions showed similar properties to those formed by Eudragit® L100-55 organic solution regarding thermodynamic properties, moisture permeability, solubility and acid tolerance ability. Furthermore, the performance of the novel film was better than that formed by Eudragit® L30D-55 aqueous dispersion. Among the three enteric coating solutions, Eudragit® L100- 55 aqueous dispersion will be a promising aqueous dispersion for enteric coating and can be used in the development of enteric-coated preparations.

1. S. Kucera, N. H. Shah, A. W. Malick, M. H. Infeld and J. W. Mcginity, Influence of an acrylic polymer blend on the physical stability of film-coated theophylline pellets, AAPS PharmSciTech. 10 (2009) 864-871; https://doi.org/10.1208/s12249-009-9275-5

2. Majumdar, K. Dipak, Thakral, Seema, Thakral and K. Naveen, Eudragit (R): a technology evaluation, Expert Opin. Drug Delivery 10 (2013) 131-149; https://doi.org/10.1517/17425247.2013.736962

3. M. N. Singh, K. S. Y. Hemant, M. Ram and H. G. Shivakumar, Microencapsulation: A promising technique for controlled drug delivery, Res. Pharm. Sci. 5 (2010) 65-77.

4. C. N. Patra, R. Priya, S. Swain, G. K. Jena and K. C. Panigrahi, Pharmaceutical significance of Eudragit: A review, Future J. Pharm. Sci. 3 (2017) 33-45; https://doi.org/10.1016/j.fjps.2017.02.001

5. F. Lecomte, J. Siepmann, J. Siepmann, M. Walther, R. J. Macrae and R. Bodmeier, Polymer blends used for the coating of multiparticulates: comparison of aqueous and organic coating techniques, Pharm. Res. 21 (2004) 882-890; https://doi.org/10.1023/B:PHAM.0000026443.71935.cb

6. X. Xing, X. Zhao, J. Ding, D. Liu and G. Qi, Enteric-coated insulin microparticles delivered by lipopeptides of iturin and surfactin, Drug Delivery 25 (2018) 23-34; https://doi.org/10.1080/10717544 .2017.1413443

7. S. Nimkulrat, K. Suchiva, P. Phinyocheep and S. Puttipipatkhachorn, Influence of selected surfactants on the tackiness of acrylic polymer films, Int. J. Pharm. 287 ( 2004) 2 7-37; h ttps://doi. org/10.1016/j.ijpharm.2004.08.022

8. K. Thoma and K. Bechtold, Influence of aqueous coatings on the stability of enteric coated pellets and tablets, Eur. J. Pharm. Biopharm. 47 (1999) 39-50; https://doi.org/10.1016/S0939-6411(98)00086-1

9. F. Sadeghi, M. Shahabi and H. Afrasiabi, Comparison of physicomechanical properties of films prepared from organic solutions and aqueous dispersion of Eudragit RL, Daru, J. Fac. Pharm. Tehran Univ. Med. Sci. 19 (2011) 100-106.

10. S. Bose and R. H. Bogner, Solventless pharmaceutical coating processes: a review, Pharm. Dev. Technol. 12 (2007) 115-131; https://doi.org/10.1080/10837450701212479

11. S. C. Porter and L. A. Felton, Techniques to assess film coatings and evaluate film-coated products, Drug Dev. Ind. Pharm. 36 (2010) 128-142; https://doi.org/10.3109/03639040903433757

12. H. Bando and J. W. Mcginity, Physicochemical properties of enteric films prepared from aqueous dispersions and organic solutions, Int. J. Pharm. 313 (2006) 43-48; https://doi.org/10.1016/j.ijpharm.2006.01.021

13. J. C. Gutierrezrocca and J. W. Mcginity, Influence of aging on the physical-mechanical properties of acrylic resin films cast from aqueous dispersions and organic solutions, Drug Dev. Ind. Pharm. 19 (1993) 315-332; https://doi.org/10.3109/03639049309038770

14. W. Zheng and J. W. Mcginity, Influence of Eudragit NE 30 D blended with Eudragit L 30 D-55 on the release of phenylpropanolamine hydrochloride from coated pellets, Drug Dev. Ind. Pharm. 29 (2003) 357-366; https://doi.org/10.1081/DDC-120018210

15. L. M. Her and S. L. Nail, Measurement of glass transition temperatures of freeze-concentrated solutes by differential scanning calorimetry, Pharm. Res. 11 (1994) 54-59; https://doi.org/10.1023/A:1018989509893

16. N. H. Parikh, S. C. Porter and B. D. Rohera, Tensile properties of free films cast from aqueous ethylcellulose dispersions, Pharm. Res. 10 (1993) 810-815; https://doi.org/10.1023/A:1018992607245

17. A. Akhgari, F. Farahmand, H. A. Garekani, F. Sadeghi and T. F. Vandamme, Permeability and swelling studies on free films containing inulin in combination with different polymethacrylates aimed for colonic drug delivery, Eur. J. Pharm. Sci. 28 (2006) 307-314; https://doi.org/10.1016/j.ejps.2006.03.005

18. S. C. Porter and K. Ridgway, The permeability of enteric coatings and the dissolution rates of coated tablets, J. Pharm. Pharmacol. 34 (1982) 5-8; https://doi.org/10.1111/j.2042-7158.1982.tb04667.x

19. Y. Cuppok, S. Muschert, M. Marucci, J. Hjaertstam, F. Siepmann, A. Axelsson and J. Siepmann, Drug release mechanisms from Kollicoat SR:Eudragit NE coated pellets, Int. J. Pharm. 409 (2011) 30-37; https://doi.org/10.1016/j.ijpharm.2011.02.026

20. F. Podczeck, P. E. Knight and J. M. Newton, The evaluation of modified microcrystalline cellulose for the preparation of pellets with high drug loading by extrusion/spheronization, Int. J. Pharm. 350 (2008) 145-154; https://doi.org/10.1016/j.ijpharm.2007.08.040

21. L. Chatterjee, T. Rades and I. G. Tucker, Mechanical properties of excipients do not affect polymer matrix formation, Int. J. Pharm. 384 (2010) 87-92; https://doi.org/10.1016/j.ijpharm.2009.09.047

22. S. Obara and J. W. McGinity, Properties of free films prepared from aqueous polymers by a spraying technique, Pharm. Res. 11 (1994) 1562-1567.

23. R. Bodmeier and O. Paeratakul, Mechanical properties of dry and wet cellulosic and acrylic films prepared from aqueous colloidal polymer dispersions used in the coating of solid dosage forms, Pharm. Res. 11 (1994) 882-888; https://doi.org/10.1023/A:1018942127524

24. B. Qussi and W. G. Suess, The influence of different plasticizers and polymers on the mechanical and thermal properties, porosity and drug permeability of free shellac films, Drug Dev. Ind. Pharm. 32 (2006) 403-412; https://doi.org/10.1080/03639040600559099

Acta Pharmaceutica

The Journal of Croatian Pharmaceutical Society

Journal Information


IMPACT FACTOR 2017: 1.071
5-year IMPACT FACTOR: 1.623

CiteScore 2017: 1.46

SCImago Journal Rank (SJR) 2017: 0.362
Source Normalized Impact per Paper (SNIP) 2017: 0.642

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 123 123 30
PDF Downloads 97 97 25